Descrizione
Mobile Floor Crane for 200kg to 1000kg Material Lifting
This mobile floor crane is intended for workshops, warehouses, installation work, maintenance and short-distance material positioning. The correct configuration depends on the load, lifting height, supporting structure and operating environment.
Main Features
- Mobile support frame for floor positioning
- Rotating boom with travel-limit protection
- Electric motor, reducer, brake and rope drum
- Available 220V or 380V configurations
- Multiple capacity options for project selection
Applications
The crane supports controlled handling of compatible building materials, workshop components and maintenance loads within its rated capacity. It must not be used for lifting people. Loads must be secured and kept clear of personnel.
How to Select the Crane
Confirm the rated load, boom reach, hook height, floor capacity, voltage, travel route and required mobility. Rated capacity may change with boom position or reach, so the load chart and instructions must be checked before use.
Provide photographs or drawings of the installation area. Roofs, floors, brackets and attachment points must support the crane, counterforces and lifted load.
Pre-Use Inspection
- Inspect the frame, boom, welds, pins and fasteners.
- Check the hook, wire rope, drum and limit devices.
- Test brakes, controls and emergency functions.
- Verify the supporting surface and exclusion zone.
- Complete a low-height test lift.
The UK Health and Safety Executive provides general lifting operations guidance covering planning, supervision and competent operators. Local requirements and the equipment manual must also be followed.
Operation and Load Control
Plan the lift before starting. Keep the load within the rated limit and avoid side pulling, shock loading and sudden movement. The operator should maintain a clear view or work with a trained signal person.
Do not move beneath a suspended load. Stop operation if the support moves, the rope winds incorrectly, the brake slips or unusual noise occurs.
Maintenance and Storage
Inspect wire ropes, hooks, bearings, brakes, hydraulic parts and electrical connections at the required intervals. Replace damaged components before use. Lubricate moving parts according to the manual and protect electrical equipment from water.
Store the crane with the boom lowered and the hook secured. Folding models should be locked in the storage position.
Capacity and Travel Route
Choose the mobile floor crane using the maximum load at the required boom reach. Verify doorway width, floor condition, turning space and hook height before selecting the frame and wheel arrangement.
Move the crane only as permitted by its operating instructions. Keep the load low and controlled, avoid slopes and sudden turns, and use a clear route separated from pedestrians.
Component Checks
Inspect wheels, axles, boom pins, hook, rope drum, brake and controls. Confirm that the power cable or battery system suits the work area and does not create a trip or damage hazard.
Related Products and Quotation
Compare other construction mini cranes. For a quotation, send the load, lifting height, voltage, site photographs and destination port.
