ZLP630 and ZLP800 Rope Suspended Platform
ZLP630 and ZLP800 Rope Suspended Platform is the exact configuration covered on this page. Confirm the complete system against the rated load, electrical supply and site conditions.
ZLP630 and ZLP800 rope suspended platform comparison for facade construction, cleaning and maintenance. Selection must be based on the verified model, platform length, rated load and project conditions.
Product Introduction
(1) Platform
Platform is the working place, consist of high balustrade, low balustrade, bottom plate,
hoist mounting deck connected with bolt.
(2) Hoist mechanism
Hoist is the motor of suspended platform, adopted electric climbing principle.
Hoist is driven by electric regenerative braking and three phase asynchronous motor,
starting through turbine & worm and gear reducer, with steel rope climbing, hoist works
up and down following the rope, so keep the platform up and down.
(3) Safety lock
Safety lock is the protection equipment. When the platform goes acclivitous, or ropes
are broken off and falling, the safety locks will lock the wire ropes automatically and
quickly to ensure the safety of the operator from falling and inclining. The safety lock is
of swinging type.
(4) Suspension mechanism
Suspension mechanism is on the top of the building to suspend the platforms through
the steel rope.
(5) Electrical control system
Electrical Control System is used to control the movement of platforms, and the main
elements are fixed in insulated board, Universal Switch,Power Indicator, Start Button
and the Emergency Stop Button are in the door board of the box.
Main Parameter:
| Name | Technical parameter | |||
| Model | ZLP800 | ZLP630 | ||
| Rated load | 800Kg | 630Kg | ||
| Lifting speed | 8-10m/min | 8-10m/min | ||
| Platform Dimension L×W×H(mm) Spray plastics corrosion-resistant | 7500(2.5m*3)×720×1300 | 6000(1+2+3m)×720×1300 | ||
| Lifting Height | 100 m | 100 m | ||
| Cable | 100 m | 100 m | ||
| Steel rope (specially-made) | 9.1mm | 8.3mm | ||
| Hoist | Pulling power | 7.84KN | 6.17KN | |
| electric motor | model | YEJ100L-4 | YEJ90L-4 | |
| Power | 1.8KW*2 | 1.5KW*2 | ||
| Voltage | 380V 50Hz | 380V 50Hz | ||
| Rotational speed | 1420rpm | 1420rpm | ||
| Braking moment | 15Nm | 15Nm | ||
| Safety lock | Permission force of impact | 30KN | 30KN | |
| Locking Cable Angle | 3°~8° | 3°~8° | ||
| Suspension mechanism (Galvanized ) | Front beam overhang | 1.3~1.5m | 1.3~1.5m | |
| Support adjustable height | 1.44~2.14m | 1.44~2.14m | ||
| Counterweight | 1000kg | 800kg | ||
| 20’ft container | 8sets | 9sets | ||
| 40’ft container | 13sets | 14sets | ||
Project Selection Notes
Confirm platform material, section arrangement, hoist model, wire ropes, safety locks and electrical supply as one complete system. Include workers, tools and materials in the load calculation.
- Provide facade dimensions and working height.
- Confirm voltage, phase and frequency.
- Check roof suspension and counterweight conditions.
See the current platform range, review compatible parts, or send project details.
For site planning, also review the applicable local rules and the OSHA suspended scaffold requirements.
Previous Post
Next Post
