0086 17317571902 [email protected]
  • GET A QUOTE
    • page-header-img

    Double-Cabin Suspended Hoist Platform

    Double-Cabin Suspended Hoist Platform
    27 августа 2018 г. Buildinglift
    Off
    Suspended Working Platforms

    Double-Cabin Suspended Hoist Platform

    Double-Cabin Suspended Hoist Platform is the exact configuration covered on this page. Confirm the complete system against the rated load, electrical supply and site conditions.

    Double-cabin suspended platform for projects requiring separated work areas and verified dual-cabin configuration. The final configuration must be verified against the working load, building geometry and destination power supply.

    MODEL NUMBERZLP630-016ZLP630ZLP500
    Rated Capacity(kg)800630500
    Lifting Speed(m/min)8-109-119-11
    Rated Power(KW)2.2×21.5×21.1×2
    Hoist ModelLTD80LTD63LTD50
    Модель замка безопасностиLSA30LSA30LSA30
    Dimension of platform

    L x W x H(mm)

    		7500x690x12306000x690x12305000x690x1230
     

    suspension mechanism

     

    weight(kg)

     

    		350350350
    Counterweight(kg)1000800750

    Краткая информация

    Product name: Double cabin hoist lifting suspended platform
    Материал: Сталь
    Certificate: ISO9001/CE
    Surface Treatment: HDG
    Цвет: индивидуальный
    Тип: Подвесное рабочее оборудование
    Application: Building Facade Cleaning
    Voltage: 220V/380v/415V/50hz
    Keyword: High Altitude Working
    Name: Swing Stage

    Стандарты утилизации основных компонентов

    Основные силовые крепления подвесной рабочей платформы: Если механизм подвески или подвесная платформа выглядят следующим образом, их следует утилизировать.

    1. After the overall instability, it must not be repaired and must be scrapped.

    2. When permanent deformation is generated and cannot be repaired, it must be scrapped.

    3. When some components are permanently deformed and cannot be repaired and the surface corrosion or wear depth exceeds 10% of the original component, the corresponding components should be scrapped.

    4. When cracks occur in structural parts and welds, according to the stress situation and crack conditions, after repairing or taking reinforcement measures, the original design requirements can be met, and repairs must be taken to strengthen the measures before they can continue to be used. Otherwise, they should be scrapped.

    Configuration and Ordering Notes

    Confirm platform length, material, hoist model, safety locks, wire ropes, controls and suspension mechanism as a complete approved system. Include workers, tools and materials in the load calculation.

    • Building height and facade dimensions
    • Required load and platform arrangement
    • Voltage, phase and frequency
    • Roof and parapet conditions

    Compare suspended platform products, review replacement components, or request project selection support.

    For site planning, also review the applicable local rules and the OSHA suspended scaffold requirements.