ZLP250 to ZLP1000 Aerial Platform Model Guide
ZLP250 to ZLP1000 Aerial Platform Model Guide is the exact configuration covered on this page. Confirm the complete system against the rated load, electrical supply and site conditions.
ZLP aerial platform model guide comparing ZLP250, ZLP500, ZLP630, ZLP800 and ZLP1000 load classes. The equipment or component must be selected using verified project and nameplate data.
| Technical Parameters |
| Item | ZLP250 | ZLP500 | ZLP630 | ZLP800 | ZLP1000 |
| Rated Loading | 250KG | 500KG | 630KG | 800KG | 1000KG |
| Speed | ~9.5 m/min | ~9.5 m/min | ~9.5 m/min | ~8.5m/min | ~8.3m/min |
| Size | L :1m ,2m,2.5,3m; W: 0.69m; H: 1.18m | ||||
| Suspension Mechanism | Rated exerted length of front beam | 1.1m~1.5m | |||
| Terrain clearance of front beam | 1.45m~1.75m | ||||
| Hoist | |||||
| Item | LTD63 | LTD80 a drive | LTD80 s drive | ||
| Tensão | 220v/ 415v/380v 50/60 hzPLATFORM DRAWING 3 phase / single phase | ||||
| Poder | 2*1.5kw | 2*1.8/2.0kw | 2*2.2kw | ||
| Speed | 1400 n/min | ||||
| Fechadura de segurança | ||
| Item | Anti-proofing LS30 | |
| Angle of tilted locking rope | 3°~8° | |
| Allowable impact force | 30KN | |
| Cabo de aço | ||
| Tipo | 4*31SW+FC-φ8.3 | 4*31SW+FC-φ8.6 |
| Control panel | ||
| Brand | CHNT | Schneider |
| Conter weight | ||
| Iron cast | Cement | Hot galvnized steel with concrete |
PLATFORM DRAWING
Product show
1.Suspension mechanism &Platform
Surface treatment with hot galvanized craft, the steel is not easy to rust .
The service life can be as long as 15 years , more durable than spraying process.
2.Hoist
With famous brand of motor , large braking torque
Inside gear is 100% copper, the warranty is 5 years.
unique anti-rope clamping device , when rope is clamped ,alarming rings, hoist will stop working , safety is increased, maintenance cost is reduced
Lubrication oil is 220#industry gear oil.Lubrication oil is 220#industry gear oil.
3.Safety lock
The lock cylinder uses special stainless steel , with strong impact resistance, higher
toughness,wear resistant, long services life ,safe and reliable
4.Electric control system
The electric components uses famouse brand CHNT, SCHNEIDER,quality is guaranteed
Perfect circuit design, including leakage protection, current overload protection,emergency braking,operate simply.
5.Wire rope
Our supplier is Jiangsu Fasten Steel Cord Co.,Lt—Chinese famous brand”FASTEN”
6.Cable
Using national standard cable 2.5*3+1.5*2, using life is longer
Packaging & Shipping
Hoist and safety lock are packed in one plywood case, size 610*310*340mm;
Control box/ control panel is packed in a plywood case,size 570*440*270mm;
Products will be package by plywood case for LCL
For the whole container , the goods will be packaged by pallet.
One 20′ container can put about 8-10 sets suspended platform
Detalhes rápidos
Local de origem: Xangai, China (continente)
Model Number: ZLP630 / ZLP800
Work platform finished: aluminum alloy , Hot galvanized steel
Size: 3*2000/2500mm*690mm *1180mm
Rated Loading: 630kg 800KG
lifting height: 100m
Hoist: LTD63 LTD80
Voltage: 380v,415v,220v 50/60 Hz
Safety lock: Tilt proofing LS30
Wire rope diameter: 4*31SW-FC-8.3mm
Certification:ISO9000,CE
Selection and Inspection Notes
Confirm the exact model, rated load, dimensions, electrical supply and compatibility before ordering. For safety devices, hoists and suspension components, visual similarity is not sufficient.
- Provide equipment model and nameplate photos.
- Confirm the intended application and working environment.
- Review inspection, testing and installation requirements.
Browse suspended platform equipment, see construction hoist parts, or send technical details for checking.
For site planning, also review the applicable local rules and the OSHA suspended scaffold requirements.
Previous Post
Next Post
