• 0
  • page-header-img

    100m 200m hire temporary suspended platform

    ZLP630 ZLP800 ZLP1000 electrico andamios colgantes , hanging scaffolding , suspended rope platform

    ZLP630 ZLP800 ZLP1000 electrico andamios colgantes , hanging scaffolding , suspended rope platform

    100m 200m Hire Temporary Suspended Platform


    Platform is an alternative to traditional scaffold , reduce labor intensity and improve work efficiency, and the new high operating equipment can be reused. Currently , the use of the gondola building has become a trend , has been widely recognized in the construction of high-rise multi-storey high building facades , and curtain wall installation , construction and maintenance of clean exterior insulation and other high-altitude operations.

    At the same time can be used for large tanks , bridges and dams and other engineering operations. The use of this product , you can avoid scaffolding . So that greatly reduce the cost of construction , construction costs only 28 % of the traditional scaffolding , and a substantial increase in work efficiency. Suspended Platform flexible operation , the shift is easy, convenient and practical, safe and reliable.

    Technical parameters


    Name

    Technical parameter
    ModelZLP800ZLP630
    Rated load800Kg630Kg
    Lifting speed8-10m/min8-10m/min
    Platform Dimension L×W×H(mm)7500×720×13006000×720×1300
    Lifting Height100 m100 m
    Cable100 m100 m
    Steel rope (diameter)9.1mm8.3mm
    HoistPower1.8KW*21.5KW*2
    Voltage380V/50HZ380V/50HZ
    Safety lockPermission force of impact30KN30KN
    Locking Cable Angle3°~8°3°~8°
    Suspension mechanismFront beam overhang1.3~.1.5m1.3~.1.5m
    Support adjustable height1.44~2.14m1.44~2.14m
    Counterweight1000KG1000KG
    20’ft container8 sets9 sets

     

     

     

     

     

     

     

     

     

     

     

     

    What should you do when working on a suspended platform ?


    Ensure that platform is installed and maintained according to job requirements, safety regulations, standards and the manufacturer’s specifications.
    Inspect all equipment before erecting and before each shift.
    Use a separate safety harness attached to an independent life line for each worker. Maintain lanyard attachment at highest point possible.
    Ensure that suspended platform roof beams and attachments are secure.
    Ensure that the roof or parapet wall is structurally sound to support either outriggers or cornice hooks.
    Check for kinked or damaged ropes.
    Secure all ropes at anchor ends.
    Ensure that all safety equipment, stops, override switches and brakes function properly.
    Prevent contact between welding or grinding equipment and wire safety or suspension ropes.
    Secure hand tools to the platform.
    Ensure that power source is secured and properly grounded.
    Secure platform when not in use.
    Ensure that guardrails and toe boards are in place.
    Extend suspension ropes completely to the ground or terminate with wire rope clips to prevent the stage from running off the end of the ropes.
    Test by raising the fully loaded platform a few feet off the ground before going aloft.

    What should you not do ?


    Do not exceed platform load capacity.
    Do not enter or leave the platform other than at ground level or at other safe access points.
    Do not allow electric cables or connections to lie in gutters or other areas where water can collect.
    Do not work near exposed electrical circuits or equipment.
    Do not join platforms unless they are designed for this purpose.
    Do not use damaged or defective equipment.
    Do not alter, substitute or remove components of platform.
    Do not use life line for raising or lowering tools or materials.
    Do not move work platform unless all workers on it are protected by individual safety belts and lines.

    よくある質問


    1.Q:Are you a factory or trading company?

    A:We are factory,passed CE,BV certification.

    2.Q:Where is your factory?How can i visit ?

    A:Our factory located in qingdao city.You can fly to qingdao liuting airport,then we can pick you up to our facotry to visit.Warm welcome visit us.

    3.Q:How does your factory control the quality of machines and after sales service?

    A:Our machines passed CE,BV,ISO,SGS certification,pls confirm the quality.All our machines have 1 year guarantee, will provide lifetime maintenance.

    Why choose us?

    We are ready to give them a turnkey solution, by designing the line according to their space, designing all

    electrical Installation, water installation, civil foundation, training their people and proving that they will

    get the targets for production according to the design.

    The cost of the machinery they are paying is one off but the correct production design and machine

    configuration in order to get the production targets is the most important point. Even if somebody got the

    cheapest machine quotation, at the end of the day, what is count are the production quantity, quality and the

    durability .so to cover the investment in the correct time.

    If you are interested in our machine,or have any doubts,welcome to contact us~~

    Quick Details


    Place of Origin: Shanghai, China (Mainland)
    Model Number: zlp800
    working height: 100m
    cable: 100m
    rated loading capacity: 800kg
    rated lifting power: 8
    power: 1.8kw
    locking cable angle: <=8
    color: as your require
    main market: all over the world
    type: Hire Temporary Suspended Platform
    size: as your order

    Comments are closed.